Details

Home> Details

KSD301 Bimetal Thermostat

  • KSD301 Bimetal Thermostat
  • KSD301 Bimetal Thermostat
  • KSD301 Bimetal Thermostat
KSD301 Bimetal Thermostat
  • Share To
  • 商品详情

PRODUCT DESCRIPTION

The product is applicable to the thermal radiation control on various electric heating appliances including electric hairdryers, electric heaters, warm air blowers, dehumidifiers, stewpots, etc.

TONGBAO
 

BASIC TECHNICAL PARAMETERS

Uses:overheat protectionApplication:coffee machine/water dispenser/toaster /microwave/ electric heater/portable refrigerator, etc.
Housing material:ceramicCurrent:10A/16A
Maximum operating temperature:220℃Temperature difference:for reference
Tolerance:for referenceProtection level:IP00
Contact material:silver / goldInsulation resistance:use the insulation resistance meter to add voltage DC500V, >10M.
Electrical strength:The part between live parts and non-charged parts can withstand 2000V (reinforced insulation type: 3750V), 50Hz AC current, sine wave, one-minute bearing test. No breakdown, no arcing.

Reset type:manual.

Resistance between terminals:≦50mΩHeat resistant temperature:280°C (long term); 310°C (less than 15 minutes)
Temperature characteristics:regular type - the disconnection temperature is higher than the on temperature. (Normally closed); Type K - Disconnect temperature is lower than the on temperature. (Normally open); One-time action type - The temperature controller is turned on at room temperature, and the thermostat cannot be reset after it is disconnected.

Disc diameter:Φ12.8mm (1/2")Certification:UL/CQC/TUV
Terminal model:customized (for reference)Cover:Customized (for reference)

 

PRODUCT ADVANTAGES

Easy to install;
High precision;
Fast heat transfer;
High durability;
No breakdown, no arcing;
Each thermostat will be tested and the temperature pass rate is high.
tongbao
 

DIMENSION OF THE MAIN BODY

tongbao
 

SAFETY CERTIFICATE






最高 OT 
Max. OT
寿命次数 
Life cycles
250V 10A125V 16A250V 16A
160°C100,000CQC: 07002021574

190°C60,000

CQC: 07002021574 
TÜV: R50128729
220°C30,000CQC: 07002021574 
TÜV: R50128729


100,000UL: E137238, sec. 2UL: E137238, sec. 2
 

ORDER DETAILS

package200/ inner box, 5 boxes/carton, box size: 480 (length) * 282 (width) * 218 (height) (mm)
minimal order size1000
payment methodWire transfer, Western Union
delivery time15 to 20 days

 

INSTALLATION AND DIRECTION FOR USE

Installation and use instructions:
1. Grounding method: Connected to the grounding metal parts of the equipment through the metal casing of the thermostat.
2. The thermostat shall be operated in a general indoor environment where the relative humidity of the air is not more than 90%, no corrosive gas, no flammable gas and conductive dust.
3. When the temperature controller is in contact with the temperature, the cover should be placed close to the heat-generating part of the controlled appliance, and the thermal surface of the cover should be coated with thermal grease or other similar heat-conducting medium.
4. When the temperature controller is exposed to liquid or steam, it is recommended to use a stainless steel cover and a reliable leak-proof measure to prevent liquid from seeping into the insulation of the thermostat.
5. It is not possible to collapse or deform the top of the cover to avoid changes in operating temperature or other properties.
6. Do not allow liquid to penetrate inside the thermostat! The housing must be protected from excessive forces to prevent cracking; the housing should be kept clean to prevent contamination of conductive materials to prevent short-circuit breakdown due to reduced insulation.
7. The terminal cannot be bent during use, otherwise the reliability of the electrical connection will be affected.
 

Previous
Next